Anders Ohlsson 이 파이어 몽키로 만든 공학계산 결과 그래프 입니다.

보기만 해도 멋지군요 


Abstract: This article discusses how you can generate your own 3-dimensional mesh for visualizing mathematical functions using Delphi XE2 and FireMonkey.

    Prerequisites!

This article assumes that you are familiar with the basics of 3D graphics, including meshes and textures.

    The goal!

The goal is to graph a function like sin(x*x+z*z)/(x*x+z*z) in three dimensions using brilliant colors, as the image below shows:

Hide image
Click to see full-sized image

    Generating the mesh

The easiest way to generate a mesh is to use the Data.Points and Data.TriangleIndices of the TMesh object. However, these two properties are strings, and they get parsed in order to generate the mesh at runtime (and design time if populated at design time). This parsing is pretty time consuming, in fact, in this particular case about 65 times as slow as using the internal buffers. Therefore we will instead be using the non-published properties Data.VertexBuffer and Data.IndexBuffer.

In our example we will iterate along the X-axis from -30 to +30, and the same for the Z-axis. The function we're graphing gives us the value for Y for each point.

    Step 1: Generating the wire frame

The image below shows a sparse wire frame representing the surface f = exp(sin x + cos z). Shown in red is one of the squares. Each square gets split into two triangles in order to generate the mesh. The mesh is simply built up from all of the triangles that we get when we iterate over the XZ plane.

Hide image
Click to see full-sized image

We name the corners of the square P0, P1, P2 and P3:

Hide image
Triangles

The two triangles now become (P1,P2,P3) and (P3,P0,P1).

Given that u is somewhere on the X-axis, v is somewhere on the Z-axis, and that d is our delta step, the code to set up these four points in the XZ-plane becomes:

P[0].x := u;
P[0].z := v;

P[1].x := u+d;
P[1].z := v;

P[2].x := u+d;
P[2].z := v+d;

P[3].x := u;
P[3].z := v+d;

Now we calculate the corresponding function values for the Y component of each point. f is our function f(x,z).

P[0].y := f(P[0].x,P[0].z);
P[1].y := f(P[1].x,P[1].z);
P[2].y := f(P[2].x,P[2].z);
P[3].y := f(P[3].x,P[3].z);

The points are now fully defined in all three dimensions. Next, we plug them into the mesh.

with VertexBuffer do begin
  Vertices[0] := P[0];
  Vertices[1] := P[1];
  Vertices[2] := P[2];
  Vertices[3] := P[3];
end;

That part was easy. Now we need to tell the mesh which points make up which triangles. We do that like so:

// First triangle is (P1,P2,P3)
IndexBuffer[0] := 1;
IndexBuffer[1] := 2;
IndexBuffer[2] := 3;

// Second triangle is (P3,P0,P1)
IndexBuffer[3] := 3;
IndexBuffer[4] := 0;
IndexBuffer[5] := 1;

    Step 2: Generating the texture

In order to give the mesh some color, we create a texture bitmap that looks like this:

HSLmap

This is simply a HSL color map where the hue goes from 0 to 359 degrees. The saturation and value are fixed.

The code to generate this texture looks like this:

BMP := TBitmap.Create(1,360); // This is actually just a line
for k := 0 to 359 do
  BMP.Pixels[0,k] := HSLtoRGB(k/360,0.75,0.5);

    Step 3: Mapping the texture onto the wire frame

Finally, we need to map the texture onto the mesh. This is done using the TexCoord0 array. Each item in the TexCoord0 array is a point in a square (0,0)-(1,1) coordinate system. Since we're mapping to a texture that is just a line, our x-coordinate is always 0. The y-coordinate is mapped into (0,1), and the code becomes:

with VertexBuffer do begin
  TexCoord0[0] := PointF(0,(P[0].y+35)/45);
  TexCoord0[1] := PointF(0,(P[1].y+35)/45);
  TexCoord0[2] := PointF(0,(P[2].y+35)/45);
  TexCoord0[3] := PointF(0,(P[3].y+35)/45);
end;

    Putting it all together

The full code to generate the entire mesh is listed below:

function f(x,z : Double) : Double;
var
  temp : Double;
begin
  temp := x*x+z*z;
  if temp < Epsilon then
    temp := Epsilon;

  Result := -2000*Sin(temp/180*Pi)/temp;
end;

procedure TForm1.GenerateMesh;
const
  MaxX = 30;
  MaxZ = 30;
var
  u, v : Double;
  P : array [0..3] of TPoint3D;
  d : Double;
  NP, NI : Integer;
  BMP : TBitmap;
  k : Integer;
begin
  Mesh1.Data.Clear;

  d := 0.5;

  NP := 0;
  NI := 0;

  Mesh1.Data.VertexBuffer.Length := Round(2*MaxX*2*MaxZ/d/d)*4;
  Mesh1.Data.IndexBuffer.Length := Round(2*MaxX*2*MaxZ/d/d)*6;

  BMP := TBitmap.Create(1,360);
  for k := 0 to 359 do
    BMP.Pixels[0,k] := CorrectColor(HSLtoRGB(k/360,0.75,0.5));

  u := -MaxX;
  while u < MaxX do begin
    v := -MaxZ;
    while v < MaxZ do begin
      // Set up the points in the XZ plane
      P[0].x := u;
      P[0].z := v;
      P[1].x := u+d;
      P[1].z := v;
      P[2].x := u+d;
      P[2].z := v+d;
      P[3].x := u;
      P[3].z := v+d;

      // Calculate the corresponding function values for Y = f(X,Z)
      P[0].y := f(Func,P[0].x,P[0].z);
      P[1].y := f(Func,P[1].x,P[1].z);
      P[2].y := f(Func,P[2].x,P[2].z);
      P[3].y := f(Func,P[3].x,P[3].z);

      with Mesh1.Data do begin
        // Set the points
        with VertexBuffer do begin
          Vertices[NP+0] := P[0];
          Vertices[NP+1] := P[1];
          Vertices[NP+2] := P[2];
          Vertices[NP+3] := P[3];
        end;

        // Map the colors
        with VertexBuffer do begin
          TexCoord0[NP+0] := PointF(0,(P[0].y+35)/45);
          TexCoord0[NP+1] := PointF(0,(P[1].y+35)/45);
          TexCoord0[NP+2] := PointF(0,(P[2].y+35)/45);
          TexCoord0[NP+3] := PointF(0,(P[3].y+35)/45);
        end;

        // Map the triangles
        IndexBuffer[NI+0] := NP+1;
        IndexBuffer[NI+1] := NP+2;
        IndexBuffer[NI+2] := NP+3;
        IndexBuffer[NI+3] := NP+3;
        IndexBuffer[NI+4] := NP+0;
        IndexBuffer[NI+5] := NP+1;
      end;

      NP := NP+4;
      NI := NI+6;

      v := v+d;
    end;
    u := u+d;
  end;

  Mesh1.Material.Texture := BMP;
end;

    Demo application

You can find my demo application that graphs 5 different mathematical functions in CodeCentral. Here are a few screen shots from the application:

Func1Hide image
Click to see full-sized imageHide image
Click to see full-sized imageHide image
Click to see full-sized imageHide image
Click to see full-sized image

    Contact

Please feel free to email me with feedback to aohlsson at embarcadero dot com.



원본링크


http://edn.embarcadero.com/article/42007


번호 제목 글쓴이 날짜 조회 수
공지 [DelphiCon 요약] 코드사이트 로깅 실전 활용 기법 (Real-world CodeSite Logging Techniques) 관리자 2021.01.19 14387
공지 [UX Summit 요약] 오른쪽 클릭은 옳다 (Right Click is Right) 관리자 2020.11.16 13023
공지 [10.4 시드니] What's NEW! 신기능 자세히 보기 관리자 2020.05.27 15532
공지 RAD스튜디오(델파이,C++빌더) - 고객 사례 목록 관리자 2018.10.23 21064
공지 [데브기어 컨설팅] 모바일 앱 & 업그레이드 마이그레이션 [1] 관리자 2017.02.06 22297
공지 [전체 목록] 이 달의 기술자료 & 기술레터 관리자 2017.02.06 17933
공지 RAD스튜디오(델파이, C++빌더) - 시작하기 [1] 관리자 2015.06.30 38228
공지 RAD스튜디오(델파이,C++빌더) - 모바일 앱 개발 사례 (2020년 11월 업데이트 됨) 험프리 2014.01.16 173741
1380 델파이 XE2에서 dbExpress를 이용해 오라클 연결하기 file 박병일 2012.02.15 17716
1379 이 달의 기술자료 - 2014년 4월 file 험프리 2014.04.03 16803
1378 다중 클라이언트를 위한 DataSnap 서버 만들기 관리자 2011.12.22 16102
1377 "Could not load SSL library." 오류 대응(XE7: BaaS, RESTClient, DataSnap) [1] Humphery 2014.09.12 15973
1376 RAD 스튜디오 모바일 개발 환경 설정(안드로이드, iOS) [1] file 험프리 2014.05.19 15926
1375 이 달의 기술자료 - 2015년 03월 험프리 2015.02.25 15861
1374 델파이 XE2 로 아이폰 하드웨어 컨트롤 하기 박병일 2012.01.19 15500
1373 델파이XE2의 VCL Styles 활용하기 박병일 2012.01.19 15351
1372 [REST API] REST API 이해하기 험프리 2017.05.23 15239
1371 이 달의 기술자료 - 2015년 02월 file 험프리 2015.01.29 15044
1370 파이어몽키 기반의 아이폰앱 개발에서 주소록 가져오기 박병일 2012.01.25 14425
1369 dbExpress 의 SQLConnection 에서 트랜젝션 처리하기 박병일 2012.02.08 13972
1368 델파이 XE2로 만든 아이폰 앱 - TicTacToe file 박병일 2012.01.17 13952
1367 파이어몽키 3D Text Editor file 박병일 2012.02.06 13921
1366 델파이 XE2의 DataSnap 서버와 OSX Client의 연동 박병일 2012.01.19 13536
1365 [델파이 문법 시리즈] #1. 제네릭 - 개요 file 관리자 2012.03.21 13163
1364 델파이 XE2로 아이폰앱 만들기 박병일 2012.01.18 13046